huxleagcjrcvo
Yeni Üye
Kayıt Tarihi: 2021-18-Agustos
Ülke: Turkiye
Aktif Durum: Pasif
Gönderilenler: 36
|
| Gönderen: 2022-25-Haziran Saat 05:32 | Kayıtlı IP
|
|
|
This particular location is referred to by its unique
moniker, which is "the channel."The following is a
representation of this number, which indicates the actual
channel position on the robot:You can get a good look at
the channel tree from this vantage point. When they are
finally finished, the mechanical drawing and the
mechanical robot channel will both end up in this
position. The mechanical drawing is depicted in this
manner at this particular point in time.
Other locations, such as the programmable logic
controller (PLC), have the capability of inputting and
extracting data. In addition to this, we have the
capability of connecting the switches to the controller
so that we can activate and deactivate them as required.
In order for us to be successful in achieving the goals
of this particular scenario, we will, however, be making
use of the output that the robot provides. Because of
this, the external IO can be controlled in a number of
different ways, all of which will become possible as a
result. I want to thank you for being patient with me
throughout this process and let you know that I will now
continue editing the document. We are currently in the
third position out of a total of eight outputs because we
have chosen the third output from the robot. There are a
total of eight outputs. Since we were able to
successfully attach the clamp to the third output, let's
go ahead and go over the fact that the first, second,
fourth, fifth, sixth, seventh, and eighth outputs are not
in a condition where they can be used. The entirety of
this robot is comprised of just three separate components
all together.
An enhancement is made to the functionality of the
counter's revolution in one of its iterations. Select No.
2 update including access if you want to perform fine
calibration. Once you have made your selection, press OK
to confirm that your robot is in sync with the rest of
the world after you have finished making your selection.
If this is your first time visiting the site, we ask that
you please make it a point to click the notification bell
and subscribe to the site before you leave. Thank you.
Thank you. You will be notified whenever I upload new
content, and you will be able to view Teach Pendant
Accessories Center in conjunction with all of my other
content, which covers a wide range of topics including
interview questions and answers, hydraulic and pneumatic
FANUC robot motor control, and a great deal more. You
will receive an alert whenever I upload new content.
After that, I'll show you around the witness marks that
are located on each axis of the robot so you can get a
better understanding of how it works. But before we get
into that, I want to make sure that you have a solid
foundational understanding of the primary parts of the
robot that we are going to talk about in the following
section. This will serve as the foundation upon which
everything else will be built.
Now that we have begun, we need to activate it by turning
it on, and after that, we need to tell it what to do—
what we want it to do in general, and more specifically,
whether or not we want the output to be active. Bear in
mind that the goal that we have set for ourselves is to
complete everything by teaching the robot how to do it
for us. You are aware of what it is that we want it to
achieve on its own, and as a consequence, it will not act
in any way given the circumstances that currently exist.
Because on indicates that the clamp should be closed, OK
indicates that it should be opened, and off indicates
that it should be closed, once
Teach Pendant Accessories
Center finishes this line, it will open the clamp
by energizing the robot output. This is because on
indicates that the clamp should be closed, OK indicates
that it should be opened, and off indicates that Teach
Pendant Accessories Center should be opened. Following
that, we have a brief command that, much like the command
that came before it, is part of the category of commands
that are of this type. The only thing I need to do to
exit these menus is click on this command that's sitting
right here in front of me.
As soon as you arrive, you will become conscious of the
waiting that has been taking place up until this point.
Okay, so here is what we have been able to accomplish: we
have agreed upon the weight, and we have researched the
various options that are open to us. The one that came
before it not only told us how long we will have to wait
but also asked for our feedback on how long we should
have to wait. The following one will ask us how long we
should have to wait. In other words, the program that is
currently being run will be paused, and after the period
of time that has been set aside has elapsed, we will be
able to move on to the following program. Because of
this, we now have the flexibility to move Abb teach
pendant wherever we think would be most appropriate.
Because of this, we will have the chance to put it away
for ten seconds when the opportunity presents itself. The
robot will proceed to the subsequent line in the sequence
after being given specific instructions to stop moving
for a period of ten seconds during which time must
remain immobile. On the other hand, as we go through the
motions of this exercise, we will have the opportunity to
enter a wide variety of commands.
The following thing I want to do is talk about some of
the components that go into constructing our command
line, and then I will move on to the following thing.
After that, I will move on to the next thing. To begin,
if you direct your attention to the top left corner of
the screen, you will see a black cursor that is circling
a number that represents a command. If you click on the
number, it will bring up a menu with additional options.
These are the line numbers of the instruction numbers
that are comprised to make up the actual program. You can
find those numbers listed below. So how about we just not
bother with the label at all, shall we? You'll notice
that the letter L has been placed in this particular
spot; this identifies the type of motion that we are
expected to carry out.
When comes to picking out a program, we have a number
of options available to us, so let's talk about those in
the first order of business, shall we? You are going to
notice that it draws attention to the program by
highlighting it in the memory of the controller, which
demonstrates that it is the focus of attention. Now that
we have everything in its proper place, the only thing
that remains to be done is to go through all of the
available options one by one until we find the one that
we want. In light of the particulars of this
circumstance, I intend to select a coordinate program
that was developed specifically for the purpose of
carrying out a wide variety of demonstrations and other
types of activities. As a result of this, we have to make
sure that we press the enter button.
|
Aktif Konular 
Üye Listesi 
Arama 
Yardım
Kayıt Ol 
Giriş
Gitar-tr.com FORUM : Gitar-tr.com Tanisma Toplantisi !!!
Konu: Now that we have everything that is requi
