huxleagcjrcvo Yeni Üye
Kayıt Tarihi: 2021-18-Agustos Ülke: Turkiye
Aktif Durum: Pasif Gönderilenler: 36
|
Gönderen: 2022-25-Haziran Saat 05:32 | Kayıtlı IP
|
|
|
This particular location is referred to by its unique moniker, which is "the channel."The following is a representation of this number, which indicates the actual channel position on the robot:You can get a good look at the channel tree from this vantage point. When they are finally finished, the mechanical drawing and the mechanical robot channel will both end up in this position. The mechanical drawing is depicted in this manner at this particular point in time. Other locations, such as the programmable logic controller (PLC), have the capability of inputting and extracting data. In addition to this, we have the capability of connecting the switches to the controller so that we can activate and deactivate them as required. In order for us to be successful in achieving the goals of this particular scenario, we will, however, be making use of the output that the robot provides. Because of this, the external IO can be controlled in a number of different ways, all of which will become possible as a result. I want to thank you for being patient with me throughout this process and let you know that I will now continue editing the document. We are currently in the third position out of a total of eight outputs because we have chosen the third output from the robot. There are a total of eight outputs. Since we were able to successfully attach the clamp to the third output, let's go ahead and go over the fact that the first, second, fourth, fifth, sixth, seventh, and eighth outputs are not in a condition where they can be used. The entirety of this robot is comprised of just three separate components all together. An enhancement is made to the functionality of the counter's revolution in one of its iterations. Select No. 2 update including access if you want to perform fine calibration. Once you have made your selection, press OK to confirm that your robot is in sync with the rest of the world after you have finished making your selection. If this is your first time visiting the site, we ask that you please make it a point to click the notification bell and subscribe to the site before you leave. Thank you. Thank you. You will be notified whenever I upload new content, and you will be able to view Teach Pendant Accessories Center in conjunction with all of my other content, which covers a wide range of topics including interview questions and answers, hydraulic and pneumatic FANUC robot motor control, and a great deal more. You will receive an alert whenever I upload new content. After that, I'll show you around the witness marks that are located on each axis of the robot so you can get a better understanding of how it works. But before we get into that, I want to make sure that you have a solid foundational understanding of the primary parts of the robot that we are going to talk about in the following section. This will serve as the foundation upon which everything else will be built. Now that we have begun, we need to activate it by turning it on, and after that, we need to tell it what to do— what we want it to do in general, and more specifically, whether or not we want the output to be active. Bear in mind that the goal that we have set for ourselves is to complete everything by teaching the robot how to do it for us. You are aware of what it is that we want it to achieve on its own, and as a consequence, it will not act in any way given the circumstances that currently exist. Because on indicates that the clamp should be closed, OK indicates that it should be opened, and off indicates that it should be closed, once Teach Pendant Accessories Center finishes this line, it will open the clamp by energizing the robot output. This is because on indicates that the clamp should be closed, OK indicates that it should be opened, and off indicates that Teach Pendant Accessories Center should be opened. Following that, we have a brief command that, much like the command that came before it, is part of the category of commands that are of this type. The only thing I need to do to exit these menus is click on this command that's sitting right here in front of me. As soon as you arrive, you will become conscious of the waiting that has been taking place up until this point. Okay, so here is what we have been able to accomplish: we have agreed upon the weight, and we have researched the various options that are open to us. The one that came before it not only told us how long we will have to wait but also asked for our feedback on how long we should have to wait. The following one will ask us how long we should have to wait. In other words, the program that is currently being run will be paused, and after the period of time that has been set aside has elapsed, we will be able to move on to the following program. Because of this, we now have the flexibility to move Abb teach pendant wherever we think would be most appropriate. Because of this, we will have the chance to put it away for ten seconds when the opportunity presents itself. The robot will proceed to the subsequent line in the sequence after being given specific instructions to stop moving for a period of ten seconds during which time must remain immobile. On the other hand, as we go through the motions of this exercise, we will have the opportunity to enter a wide variety of commands. The following thing I want to do is talk about some of the components that go into constructing our command line, and then I will move on to the following thing. After that, I will move on to the next thing. To begin, if you direct your attention to the top left corner of the screen, you will see a black cursor that is circling a number that represents a command. If you click on the number, it will bring up a menu with additional options. These are the line numbers of the instruction numbers that are comprised to make up the actual program. You can find those numbers listed below. So how about we just not bother with the label at all, shall we? You'll notice that the letter L has been placed in this particular spot; this identifies the type of motion that we are expected to carry out. When comes to picking out a program, we have a number of options available to us, so let's talk about those in the first order of business, shall we? You are going to notice that it draws attention to the program by highlighting it in the memory of the controller, which demonstrates that it is the focus of attention. Now that we have everything in its proper place, the only thing that remains to be done is to go through all of the available options one by one until we find the one that we want. In light of the particulars of this circumstance, I intend to select a coordinate program that was developed specifically for the purpose of carrying out a wide variety of demonstrations and other types of activities. As a result of this, we have to make sure that we press the enter button.
|