Reklam Vermek için Tıklayınız...

  Aktif KonularAktif Konular  Forum Üyelerini GösterÜye Listesi  Forumu AraArama  YardımYardım
  Kayıt OlKayıt Ol  GirişGiriş Tanisma Toplantisi !!! FORUM : Tanisma Toplantisi !!!
Konu Konu: For example ELECTROPLATING is a term used Yanıt YazYeni Konu Gönder
Mesaj << Önceki Konu | Sonraki Konu >>
Yeni Üye
Yeni Üye

Kayıt Tarihi: 2021-18-Agustos
Ülke: Turkiye
Aktif Durum: Pasif
Gönderilenler: 29
Gönderen: 2022-14-Ocak Saat 23:30 | Kayıtlı IP Alıntı huxleagcjrcvo

When a metal or metal object is coated with a very thin
layer of another metal, the process is known as
electronic plating (also known as electroplating or
electroplating). The process is typically carried out by
applying a direct electric current to the metal or metal
object. When the metals react with each other, they
partially dissolve, resulting in the formation of a
chemical bond between the two metals. Metal surfaces are
typically coated with electroplating coatings that are
less than 0.0002 inches thick, or one thousandth of an
inch in thickness.

Because of the chemical bond formed between
and the base metal, the plating is a
permanent addition to the metal's surface and does not
wear away or fade over time. In other words, it will not
naturally fall off or separate from the rest of the body
as it would if the condition were not present. When it
comes to plating, it is possible for it to be worn away
over the course of several months or even years of
regular use and abuse.

Because this top layer is so thin, it can only be used
for a limited number of tasks due to the fact that it is
so thin. Because of their corrosion resistance, certain
metals can be applied to a surface to provide additional
protection against rust, damage, and corrosion as a
result of their application.

ELECTROPLATING is a term that refers to the process of

A gold and nickel alloy that can be wire-bonded together.
A common practice in Ancient Greece for mechanically
attaching gold to other metals was to heat the metals
separately before combining the metals and then rapidly
cooling the resulting combination. Throughout history,
this material has been hammered into shape and then used
to create statues, books, and a variety of other

A chemical process that combines multiple layers of metal
to form a solid piece, with a layer of gold resting on
top of the piece's surface, is used today to achieve gold
plating, also known as gold electroplating.
Electroplating, which has been in commercial use since
the 1840s, has undergone significant refinement,
particularly during the two World War periods.

In order for the electroplating process to begin, the
part must be polished and cleaned to the greatest extent
possible before it can be exposed to the gold plating
solution. If the surface has been contaminated with dirt,
oil, scratches, or other damage, it is possible that the
surface will appear uneven and smudged as a result. It is
also possible for the gold plating to appear uneven and
smudged if it has been contaminated with dirt, oil,
scratches, or other types of damage.

A metal salt is formed from the plating metal, which is
typically gold or silver in today's electroplating
processes. This is the first step in the modern
electroplating process. It is possible to create these
salts by mixing acids and bases together. A
neutralization reaction occurs as a result of the
combination of acids and bases. In the presence of an
acid or a non-metal, the formation of metal salts takes
place when positively charged ions of the metal combine
with one another to form a compound with a negative
charge on its surface. After adding the salt to the
water, thoroughly mixing it together to create a bath for
your component is completed.

The plating process involves immersing a component in
this bath while applying an electric current to it, which
is known as the plating process. An inconsequential
amount of current is directed to the component as it
moves through the bath, dissolving the metal salts that
are present. When a current passes through your
component, gold molecules are carried along with it and
deposit on the surface of the component.

The length of time that the component is left in the bath
is typically used to determine the thickness of the
 that is applied to the

In having gold plating done, you are taking advantage of
decades of clean and refined practices that have been in
place before your very eyes.
Yukarı Dön Göster huxleagcjrcvo's Özellikler Diğer Mesajlarını Ara: huxleagcjrcvo Ziyaret huxleagcjrcvo's Ana Sayfa

Eğer Bu Konuya Cevap Yazmak İstiyorsanız İlk Önce Giriş
Eğer Kayıtlı Bir Kullanıcı Değilseniz İlk Önce Kayıt Olmalısınız

  Yanıt YazYeni Konu Gönder
Yazıcı Sürümü Yazıcı Sürümü

Forum Atla
Kapalı Foruma Yeni Konu Gönderme
Kapalı Forumdaki Konulara Cevap Yazma
Kapalı Forumda Cevapları Silme
Kapalı Forumdaki Cevapları Düzenleme
Kapalı Forumda Anket Açma
Kapalı Forumda Anketlerde Oy Kullanma

Copyright ©1998-2006
Design And Coded By ZezeroN Tech

Bu Sayfa 0.2344 Saniyede Yüklendi.