Gitar-tr.com Reklam Vermek için Tıklayınız...

  Aktif KonularAktif Konular  Forum Üyelerini GösterÜye Listesi  Forumu AraArama  YardımYardım
  Kayıt OlKayıt Ol  GirişGiriş
Gitar-tr.com Tanisma Toplantisi !!!
 Gitar-tr.com FORUM : Gitar-tr.com Tanisma Toplantisi !!!
Konu Konu: Using coconut shell activated carbon Yanıt YazYeni Konu Gönder
Yazanlarda
Mesaj << Önceki Konu | Sonraki Konu >>
dingxinda
Yeni Üye
Yeni Üye


Kayıt Tarihi: 2021-13-Ocak
Aktif Durum: Pasif
Gönderilenler: 30
Gönderen: 2021-26-Ocak Saat 09:27 | Kayıtlı IP Alıntı dingxinda

Lithium recovery from spent Li-ion batteries using
coconut shell activated
carboncoconu
t activated charcoal

Lithium is one of scarce natural resources in the world
that need to be preserve. One of the way in preserving
the resource is by recovery the rich source of the
lithium such as in the spent batteries. It is necessary
to develop a recovery method which is efficient and low-
cost to be able to recover the lithium in an economic
scale. In this study, low-cost activated carbon (AC) from
coconut shell charcoal was prepared by chemical and
physical activation methods and tested for Li removal
from Co, Mn, and Ni ions in semi-continuous columns
adsorption experiments. The maximum surface area is 365
m2/g with the total pore volume is 0.148 cm3/g that can
be produced by physical activation at 800 °C. In the
same activation temperature, activation using KOH has
larger ratio of micropore volume than physical
activation. Then, the adsorption capacity and selectivity
of metal ions were investigated. A very low adsorption
capacity of AC for Li ions in batch adsorption mode
provides an advantage in column applications for
separating Li from other metal ions.
pellets.com/">www.activated-carbon-pellets.com The
AC sample with chemical activation provided better
separation than the samples with physical activation in
the column adsorption method. During a certain period of
early adsorption (lag time), solution collected from the
column outlet was found to be rich in Li due to the fast
travel time of this light element, while the other
heavier metal ions were mostly retained in the AC bed.
The maximum lag time is 97.3 min with AC by KOH
activation at 750 °C.
Yukarı Dön Göster dingxinda's Özellikler Diğer Mesajlarını Ara: dingxinda
 

Eğer Bu Konuya Cevap Yazmak İstiyorsanız İlk Önce Giriş
Eğer Kayıtlı Bir Kullanıcı Değilseniz İlk Önce Kayıt Olmalısınız

  Yanıt YazYeni Konu Gönder
Yazıcı Sürümü Yazıcı Sürümü

Forum Atla
Kapalı Foruma Yeni Konu Gönderme
Kapalı Forumdaki Konulara Cevap Yazma
Kapalı Forumda Cevapları Silme
Kapalı Forumdaki Cevapları Düzenleme
Kapalı Forumda Anket Açma
Kapalı Forumda Anketlerde Oy Kullanma

Copyright ©1998-2006 
Gitar-tr.com
Design And Coded By ZezeroN Tech



Bu Sayfa 0.2188 Saniyede Yüklendi.